www.rfscalpal.com

Output Characteristics
Ligasealer Modes (At 475 KHz)	Maximum Open Circuit Voltage Vpp (Vp)	Maximum Short Circuit Current Arms	Maximum Power Setting Watts	Crest Factor
Low	340 (170)	2.1	95	1.5
Medimum	770 (400)	2.1	125	1.5
High	580 (295)	4.2	150	1.5

Weight and Dimensions

Input Power Requirments

Height

4.5 inch (11.5 cm)

Volats

170-270 VAC

Width

14.4 inch (36 cm)

Amps

Length

17.8 inch (45 cm)

Input

1.5 KW, 50/60 Hz

Weight

12 Kg

Low Frequency Leakage (50-60Hz) Audio Volume

Patient Leakage < 150 µArms

The mode indicator tones are adjustable to a minimum level of 45 dba at 1 meter.

Cooling

Single speed fan

High Frequency Leakage

Operating mode

Less than 150 mA rms., all output

int 10s/30s

CERTIFIED TO IEC -60601-2-2 AND IS-7583

OUTPUT CHARACTERISTICS

Electro Surgical Unit	Mode	Output Freq. (kHz)	AMximum P-P Volatage	Rated Load (ohms)	Max. Power (Watts)	Crest Factor
Bipolar	Micro/Coag Macro/Cut VLS	400 400 400	480 480 T.D	100 100 T.D	90 95 T.D	2.5 1.5 T.D
Monopolar Cut	Pure/Cut 1 Blent/Cut 2 Endo/Gastro Cut	500 500 500	1800 2600 1500	300 500 200	350 200 250	1.5 2.4 1.5
Monopolar Coag	Soft/Desiccate Spray /Fulgurate Spray	450 450 450	2300 6000 9500	150 500 500	150 150 150	4.4 7.2 8.0

Crest Factor is an indicator of a waveforms' ability to coagulate bleeders without cutting effect.

For Clinical and Technical Details :

	divlabsindia.com	www.ligasealer.com	www.quadrf.com
	www.rfscalpal.com	www.plasmaeffect.com